Shaping a Windsor Chair Spindle

 After browsing over my past videos uploaded to YouTube, I watched the one on Spindle Making. While I'm never happy with the way most of my videos come out, that video I am defiantly not happy with. It shows basically nothing but a "buffoon" hacking away at a stick of red oak. I didn't speak one word as to what I was doing or how I got to that particular point in the process. It's just a close up of me trying my best to make a video on a subject I thought I knew something about.

So with spindles to make for the chairs I'm making now, I thought this is a good time to redo a spindle video. Maybe I can give someone wanting to make a Windsor, a little more detail on how to shape them than I had when I first started.  I'm going to leave the old spindle video up and let you all comment on which one gives more info on the process and helps you make a spindle. I'm pretty sure which one it'll be but I'll let you tell me in your own words. Who knows I may have to make another with better ideas from you.

Steam Bending Windsor Chair Parts

I'm working on another chair order and need to steam bend the bows for 4 sack backs. I thought it might be helpful to show how I go about the process for those wanting to make a Windsor. In this video, I'm starting with the already shaped pieces ready to bend.

I began by riving out the bows to roughly 1" x 1" x 48". After shaping them with a draw knife and spokeshave at the shaving horse to their pre-steamed sizes, they're ready for bending. I'm self taught at this and never learned how most chair makers go about it, so I don't move the bends from a bending form to a cooling form. I tie off the bent bows and hang them on the wall to cool. I have never had any problems doing it this way and it saves not only material for more jigs, but also a ton of space in the shop. Hope this video gives someone out there a little more encouragement to dive into Windsor Chair making. Steam bending can be used for several aspects in woodworking and it's also pretty cool just to watch happen in front of you.

Logs and my Kiln

This is part of the log selection I just got that has 2 Red Oaks, 2 White Oaks, and 11 Maples. I need to cull the maple out as there aren't many clear sections but I should be able to cut off several chuncks for leg turnings and the rest will go to the firewood pile for this winter and next.

I cut a hunk off one of the maples and was able to get about 8 turning blanks that will work for legs. Here I just got finished turning these Bamboo legs and now the tenons are drying in the homemade kiln. The kiln is nothing more than a plywood box with two 100 watt light bulbs inside. In 3-5 days the tenons will be ready to final shape and go into a chair.