Flat Screen TV Cabinet

 After over a month of working on this "beast", I finally wrapped it up today. The finish alone took a week to apply and get to what I think, is a pretty realistic looking primitive finish. I made this piece for a client to house a large 55" flat screen and the components that go with it.  It's made in two pieces, the wood is poplar and and has bi-folding upper doors.

                                               
With the doors open you can see how much room is saved by the bi-fold doors. The doors are over 25" wide and would take up a lot of room when swung open if made into a full door. The color on the interior is a mixture of Butternut Squash, Black, Cream, with a touch of Mustard. Once the mixture is applied it looks horrible, not something you want happening on such a large piece. When the paint dried it gave a dirty brownish, black color that "resembles" old wood left to age. The results I am fairly happy with although I will continue trying different variations till I get the inside to look like the grungy brown, black color you see on most primitive interior cabinets.

This shows a close up of the door joinery. I used through mortise and tenons and put riven pins on a diagonal. This piece has fairly heavy doors and I wanted there to be no issue with sag. This method should help keep it as square as possible.

The color chosen, was a 3 color milk paint finish, or as I call it, my "Time Worn Finish". Black was the first coat, then a mixture of Butternut Squash, Yellow Ochre and Black to get the "pumkin'y brown" color you see, followed by a turquoise and white mixture. I put on one coat of oil/varnish to give some protection but not do away with the "dry paint" look and feel. I did the aging with scrapers, sandpaper, and a ton of elbow grease. It's not everyones preference, but for the primitive antique'r, it gives you a way to have a large flat screen TV in a cabinet that fits the TV, and still get a worn primitive look, kind of a 17th century meets the 21st century, cabinet.  It can be made out of any wood for a more formal look if needed.

The finshed cabinet in it's home.  

Rusting screws for a primitive antique look

I have always liked the look of painted antiques and how the paint seems worn (battered in some cases) and all the patina that naturally comes with age. Some of the patina is difficult to emulate, while other aspects are fairly easy. One such way to help make a new piece have the aged and more authentic look is to use rusty hardware (hinges, screws, square nails, etc). You can buy this look already done but it's expensive. I have been doing the rusting process myself for several years and it's relatively easy and much cheaper, while not entirely safe if you don't take some precautions. 

First you have to get all steel nails, screws, hinges or whatever you plan to rust. I purchased 200 #8 x 1" slotted screws for this demo and they cost me $12 in bulk. They come with a zinc coating on them all bright, shiny and new. To get them to where I want them, all rusty and grungy looking, I began with a dip in a bath of muratic acid, the kind used for swimming pools. I get mine at the big box store. It's diluted quite a bit and works good for this process although a respirator and doing this outside is a must (shop tools and their steel surfaces will rust as well just from the fumes in the air). The fumes from the acid is very unpleasant to breathe. After I have the respirator on and I'm in the grass outside away from any concrete (muratic acid will eat concrete) I pour the acid into either a plastic or glass jar till it just covers the screws etc. You'll see a yellowish bubbling froth start to appear. After a few seconds the froth dies back down and has eaten all the plating that is put on the screws. It gives a dull grey appearance.

Next I pour the acid back into the jug it came in (it can be used over and over) and pour in plain water into another plastic or glass jar. Dump the screws into the water, let them set for a few minutes then simply pour out the water and place the screws on a shop rag and let them air dry. It usually takes 24 hours for them to be ready to use. If it doesn't get enough rust the first go around I squirt more water on them and let it set again and completely dry. It's rare that I have to do it more than twice. Then once dry, they look like the aged, old screws almost every antique has.   If it was this easy to get the aged patina on wood, my job would be simple.